メインコンテンツにスキップ

Microsoft Surface Laptop 3 13.5インチ ヒートシンクとファンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

手順 2を翻訳中

英語
日本語
手順2
Microsoft Surface Laptop 3 13.5" Heatsink and Fan Replacement, Remove the heatsink shield: 手順 0、 3の画像 1 Microsoft Surface Laptop 3 13.5" Heatsink and Fan Replacement, Remove the heatsink shield: 手順 0、 3の画像 2 Microsoft Surface Laptop 3 13.5" Heatsink and Fan Replacement, Remove the heatsink shield: 手順 0、 3の画像 3
Remove the heatsink shield
  • Insert the tip of one arm of a sharp pair of tweezers into one of the holes near the top left corner of the heatsink shield.

  • Pull upwards to release the top left corner of the shield.

  • This may require a considerable amount of force, but try not to deform the shield too much—you'll need to reinstall it during reassembly.

鋭利なピンセットの片方の先端を使って、ヒートシンクシールドの左上付近の穴に差し込みます。

シールドの左上コーナーを持ち上げます。

この作業には、かなりの力が必要になるかもしれませんが、シールドを変形させないように注意しながら作業を行なってください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります