メインコンテンツにスキップ

Microsoft Surface Laptop 4 (15インチ) スクリーンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

手順 1を翻訳中

英語
日本語
手順1
Microsoft Surface Laptop 4 (15-inch) Screen Replacement, Unclip the right display cable shield: 手順 0、 3の画像 1 Microsoft Surface Laptop 4 (15-inch) Screen Replacement, Unclip the right display cable shield: 手順 0、 3の画像 2 Microsoft Surface Laptop 4 (15-inch) Screen Replacement, Unclip the right display cable shield: 手順 0、 3の画像 3
Unclip the right display cable shield
  • Insert one arm of your tweezers under the corner of the right display cable shield.

  • Gently pry up to release the clips securing the shield.

  • Try not to deform the shield too much. You'll need to reinstall it during reassembly.

  • Repeat this process around the left, right, and bottom edges of the shield until you can remove it.

ピンセットの片方の先端を、右側のディスプレイケーブルシールドの角の下に差し込みます。

シールドを固定しているクリップをこじ開けて外します。

シールドをあまり変形させないようにしてください。再組み立ての際に再取り付けする必要があります。

シールドの左端、右端、下端に沿ってこの作業を繰り返し、取り外せるようになるまで続けます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります