メインコンテンツにスキップ

Microsoft Surface Laptop 4(13.5インチモデル)のヒートシンクとファンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

手順 6を翻訳中

英語
日本語
手順6
Microsoft Surface Laptop 4 (13.5-inch) Heatsink and Fan Replacement, Pry up the heatsink: 手順 0、 3の画像 1 Microsoft Surface Laptop 4 (13.5-inch) Heatsink and Fan Replacement, Pry up the heatsink: 手順 0、 3の画像 2 Microsoft Surface Laptop 4 (13.5-inch) Heatsink and Fan Replacement, Pry up the heatsink: 手順 0、 3の画像 3
Pry up the heatsink
  • Thermal paste bonds the heatsink to the CPU.

  • Insert your spudger under the left heat pipe.

  • Pry up to release the left section of the heatsink.

  • This may take some force. Be careful not to bend the heat pipes.

  • Repeat this procedure for the right heat pipe and the CPU screw mounts until the heatsink is completely separated from the motherboard.

ヒートシンクとCPUは放熱グリスで貼り付いています。

スパッジャーを左側のヒートパイプの下に差し込みます。

こじり上げて左側のヒートシンクを外します。

この作業では若干力を入れる必要があるかも知れません。ヒートパイプを曲げないように注意して下さい。

同じ手順を右側のヒートパイプとCPUのネジ取り付け金具についても行って、ヒートシンクとマザーボードの固定を完全に外して下さい。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります