メインコンテンツにスキップ

Samsung Galaxy S6 スクリーンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

手順 6を翻訳中

英語
日本語
手順6
Samsung Galaxy S6 Screen Replacement: 手順 0、 2の画像 1 Samsung Galaxy S6 Screen Replacement: 手順 0、 2の画像 2
  • Insert an opening pick about 0.5 inches (~12mm) under the opposite bottom corner of the display.

  • Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.

  • Leave the pick under the display to prevent the button from re-adhering to the display.

開口ピックを反対側のディスプレイ下部端に約1.2cmほど差し込みます。

ピックを挿入する際、ボタンのリボンケーブルにご注意ください。ケーブルは繊細でとても裂けやすいためです。ピックの挿入が困難な状態やケーブルを引っ張っている場合は、再度熱を当ててください。

ボタンがディスプレイに再装着しないよう、ピックをディスプレイの下に差し込んだままにしてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります